Promblems with SmartStart with EVO-ALL in stand alone mode

Question

 

Nissan GTR 2014, EVO-ALL in standalone mode and SmartStart DSM200.

 

The Start, Stop, Lock and Unlock all worked via the SmartStart App. However;

• When Locking the car most of the time the app would receive a confirmation, back but it could take a while
• On Unlock, although the car unlocks the message would say "Doors are still locked. Check overall status in the status tab"
• On starting the engine there is/was a very long delay and I would say only in 50% of the cases did I receive an Engine running confirmation
• The Status screen never works and we get a message that said "The response from the server could not be interpreted. If the problem persists, go to mysmartstart.com for help (31)"

Tried two different EVO-ALLs and get exactly ther same result.

 

The SmartStart unit was previously installed with DB-ALL2 and was working fine. After trying the EVO-ALL(s) and experiencing the problems above we put the DBALL2 back in and everything works (same car same location).

 

Very strange..

 

 

 

 

 

Answer 1

EVOALL will never be able to show status on your smartstart app, it is used only for lock,unlock, trunk and start. On my personal car I receive a confirmation that the command was sent to the car but don't have another message after the car is started, this is normal.

Comments

I had been told that others had it working fine, but that was a Ford I believe. Is your personal car a Nissan also? Are you using Apple or Android phone?

If the responses never worked I probably would have just thought it was a compatibility issue, but the confirmations sometimes works which is odd (vs the DB-all where they always work). Not knowing whether a command has been carried out make the SmartStart less than idea,