EVO-ALL as ALARM only on keyless Subaru WRX 2020 Manual

Question

Hello!

I really like the EVO-ALL module and would like to use it as alarm only on my 2020 WRX. I am NOT interested in remote starting the vehicle.

Looking at the manual (https://cdn02.fortin.ca/download/103541/EVO-ALL_IG_REG_BI_SUB_WRX_2021_PTS_A_103541.pdf), I am trying to determine whether I need to connect anything apart of power and CANBUS to get the ALARM working using OEM keyless entry fobs.

The manual mentions REMOTE STARTER block, which seems to be separate to EVO-ALL, I assume I won't need it.

There is NO factory alarm in the car. Just central locking and keyless entry and push-button start.

Please advise.

Regards,

Eugene.

Answer 1

Please enter 16221 into the search bar on the top right side of the Fortin.ca webpage, this will give you the alarm guide for the Evo-All, it wil show you which wires are the inputs and outputs when you enable Option G (evo alarm) You will be following Connection A on top of the guide you linked above where you would still need to connect 12V Battery / Ground / Ignition / Can High and Low