Questions & Answers

Why don’t my tail and dash lights work?

0 votes
I self installed eco-all with T-harness using posi-tap and splice connectors. I followed the wiring diagram and checked fuses so it must be a wiring issue. I double checked the splices and taps for the lighting wire according to the diagram and it appeared to be good? (2013 Impreza key start)
asked Dec 17, 2019 in Subaru by Brent Uyehara (130 points)

1 Answer

0 votes
Blame the t-taps if PINK on the EVO is to the proper wire on the car.

 

You can also connect it right at the switch.

http://www.wirecolor.com/vehiclegroupimage/78221.jpg

http://www.wirecolor.com/vehiclegroupimage/78041.jpg
answered Dec 17, 2019 by Robert T (297,620 points)
Thank you for the response.

So just untap the EVO pink wire?
taps are cute until they decide to not play nice
Sorry. Misunderstood your response. The pink is tapped into the blk/blue line from the car. Was hoping there was an error in the wiring diagram from Fortin - ie needed to tap into a different wire.
Ahh. I’m following now. I’ll try to twist connect to ensure solid connection. Thanks again for the help!
...