Questions & Answers

2018 Subaru Impreza Regular Key with T-harness - Evo-ONE 3x Lock doesn't work

0 votes
Hi Guys.

I have a 2018 Subaru Impreza Premium trim with regular key start. I have updated EVO ONE to the latest software (both, Bypass and remote options), selected recommended options from the latest manual. After connection all the wires and harnesses today (i have used a T-harnes for the ignition) . After programming the EVO-ONE successfully, I went home, ran Decryptor, then waited for the update to finish, and unplugged when the message said it is save to do so. Went to the car, hooked all harnesses back and... car doesn't respond to 3x Remote start. It would start normally with the key and all functionality is there, just doesn't remote start. Please, advice.
 

P.S. I did cut the yellow loop for Automatic Transmission, but have changed 1 option in remote settings to have the car on only for 7 minutes. Also, I didn't connect the hood pin switch, because I never work under the engine bay and in my previous fortin installs it worked fine without it

Thank you,

Michael
asked May 2 in Subaru by M B (490 points)
edited May 2 by M B

1 Answer

0 votes
You must enable option 38.2
answered May 2 by Mathieu Bertrand Collin (49,520 points)
Option 38.2 WAS enabled. It actually works now. I reprogrammed unit in the car, came back home, ran decryptor again and boom, started working like a charm
...