Questions & Answers

INT-SL+ not seeing OEM lock signal to initate a start on RS-00 G5.

0 votes
I am usining an INT-SL+ and a RS00-G5 on a 02 Trailblazer LTZ. I hooked up the module D2D to the remote start and when I go to program the bypass the light doesn't blink when I press the lock on the OEM fob. I can get the remote start to work by hooking up the green wire to the - door lock wire, after the remote start sees 3 consecutive lock pulses it starts. But once it remote starts it locks the doors (1 pulse) you enter the vehicle and leave your driveway the vehicle locks the doors (2 pulse) you go to the store and your wife gets out then gets back in you leave vehicle locks the door (3 pulse). Remote start initiates a start. Am I missing something?  Is there a different wire that pulses when the factory alarm is armed?  Will a firm ware update fix this?
asked Feb 22, 2015 in Chevrolet by chris macphee (180 points)

1 Answer

+1 vote
 
Best answer
3x lock start is not a feature of the intsl+, it's coming from your remote start. You should contact your remote start manufacturer regarding this issue.
answered Feb 23, 2015 by chris macphee (85,190 points)
selected Feb 23, 2015 by Robert T
The guide ask for a lock command from the remote start, not the OEM fob, this is why you don't see the led flash.
So upgrading the firmware will not fix this problem, correct?
Correct, nothing to do with firmware there is no remote detection with the INT-SL.

You need to wire the activation input (maybe called external trigger), from your remote starter, to your door lock circuit.
...