Questions & Answers

2010 HONDA RIDGELINE

0 votes
evo one, wire to wire, connected all wires used guide # 86261. Programming problem, after the 10x red flashes the light shuts off and does not turn to blue. Checked all the wirings and they all got good contact. Also tried a different unit and same results. I did the troubleshooting guides and its mentioning the yellow wire on the 20 pin connector to ignition? which on the guide i used does not show use for that yellow wire.
asked Nov 14, 2022 in Honda by Moike (580 points)
edited Nov 14, 2022 by Moike

1 Answer

–1 vote
 
Best answer
Are you holding the button down when you plug in the four pin connector first all the other connectors need to be unplugged and then hold down the button and plug it in and wait till the light turns blue and then let go this has nothing to do with wiring this only requires a power and ground
answered Nov 14, 2022 by john lance (620 points)
selected Nov 15, 2022 by Moike
not very helpful, its 6 pin not 4 pin.... come on johnny not very bravo of you to answer questions you don't know the answer to. Thank you!
...