23 tundra 4x4 non hybrid push to start keyfob getting disabled temporarily

Question

why is the evo one locking me out of using the doors/keyfob and not for a few minutes. When i tried to remote start using the keyfob i loose all keyfob functions cant start car and cant open/close doors or open tail gate. I also noticed no lights on the evo one while i tried to start it. I do have fortin evo telematics module selected which i havent ordered yet. will be getting the ascl7 instead the more expensive evo lte module. decryptor says completed succefully

Answer 1

Hello,

The oem remote should always work as intended, before and after the installation.

What module are you installing? what is the S/N to the module?

What t-harness are you using?

Best regards.

Comments

Module evo-one

serial 002b04327727

t harnes is THAR-ONE-TOY16 

on box it says thar-one-toy16 but the cable in the box says THAR-TY120 Harness

also im not using the hood pin

---

guess u only get one response???

---

"I also noticed no lights on the evo one while i tried to start it."

- if you get no lights on the unit when started normally this would indicate the module is not programmed.

I would try unplugging and re plugging all connectors of the t-harness then re programming it in the vehicle and re running dcryptor.

Best regards.