Questions & Answers

Evo one won't go to valet mode

0 votes

Evo one is NOT going to valet mode. I have all the wires checked, good ground to the module and ignition reading 12V. My issue is that evo one is doing any thing after I programmed it, NO lights at all on both sides bypass and remote starterAnyone who can help me with the issue that I have.

service no:  002B07  100211

posté Oct 20, 2019 dans la catégorie Toyota par Hermon Gebreslassie (160 points)
modifié Oct 21, 2019 par Hermon Gebreslassie

1 Réponse

0 votes
What is the service number or S/N to the module?
répondu Oct 21, 2019 par derek g (339,570 points)
Service No : 002B07  100211
valet mode requires 3 things, power ground and a switched ignition. If you have verified these three things I would meter the valet button to make sure it is not open all the time.
valet button tested with ohm meter works fine.
Then looking at your vehicle (06 corolla), I would suggest verifying either you foot brake wire or parking light wire. There is an issue with one of these 2.
They're both working, I do have continuity and voltage reading.
I suggest calling us at your earliest convenience  so we can verify the installation with you.

1-877-336-7797

Mon-Fri

8-6 EST.
The guy is not helping on the phone.
Is there any way to test evo one module out of car. I think it's malfunctioning.
All the module needs for valet mode is power - ground - ignition. It does not even need to be installed a car.

 

Ignition On, press 3x times on valet button, ignition off.
I bought another one, it worked for two days and then blew up. I don't know why?
Module blowing up = installation problem.
Service No: 002B07 302835
...