Questions & Answers

I can't get the yellow/black wire aux output to work.

0 votes
I selected multiple options under option 25, (0.5 second to 30 second latch time), and no option allows me to have the yellow/black wire output anything, (neagative or positive, either will do as I need to drive a relay). I need the yellow black wire to activate a 12V relay in order to simulate pushing the front windshield de-icer button. It needs to be a quick latch, unlike the orange wire on the 6 pin connector which is being used to power the rear defroster/side view mirrors continuosly in R/S mode.
posté Aout 2, 2021 dans la catégorie Honda par Jutras Mark (130 points)

1 Réponse

0 votes
The yellow/black wire is a negative output wire. it can only be activated manually via an RF kit (aftermarket remotes and antenna) OR automaticallly by also enabling function 39 to mode 1, but is temperature controlled.
répondu Aout 2, 2021 par J M (64,060 points)
Thanks Rico! I didn't realize that function 39 had to be enabled, I thought disabling it would simply turn function 25 on all the time. I changed the settings with the Flashlink manager, put the Evo-One in the freezer for 45 minutes and tried it out and it worked as it should.
...